LowPro Power Connectors

LowPro is a line of low profile power connectors that feature high current power contacts in a form factor that can be as low as 7.5 mm. Thanks to its low profile — approximately 50% of comparable designs — LowPro connectors allow achieving greater airflow efficiency in the power system designs.

General features

LowR contacts deliver high current, low contact resistance and minimal insertion force
Power contacts rated at 40A each, at 30 degree temperature rise (CSA rating)
True hot-plug contacts option
Any combination of right-angle and straight pin and socket
Can be terminated to cable, PCB or busbar PCB (solder and press-fit) on either side
350 micro-ohms contact resistance
0.295" (7.5 mm) off the board
Alignment guides add to contact's built-in gatherability

Key benefits

High current density thanks to high-performance LowR contacts
Low profile design (only 50% of standard SSI connector) for better airflow efficiency
Versatile design with wide selection of contact length and sizes, and termination styles
Application-specific configurations available. Consult Tribotek for details.

True hot-plug contacts

LowPro connectors can be fitted with Tribotek true hot plug contacts, allowing current interruption under load in conformance with UL 1977 and C22.2 No. 182.3-M1987 safety regulatory standards.

Big in power, small in space

LowPro connectors use a combination of LowR power contacts capable of 40A each (CSA rating at 30 degree rise), and signal contacts, all packaged in a low profile form factor of as little as 7.5mm high.

Variety of configurations

LowPro connectors are available in right angle-to-right angle, right angle-to-straight, and straight-to-straight pin and socket combinations. In addition, PCB, cable and busbar terminations can be used on either side of the connectors, making this an extremely versatile power interconnection solution.
Print-friendly format

DOWNLOADS

Product datasheet
UL/CSA report
RoHS certificate

MORE INFO

For more information, to obtain a Customer Use Drawing, or discuss specific applications, please contact Tribotek.